Heskins H3455 FlowGrip Thin Non-Abrasive Anti-Slip Tape
Heskins H3455 FlowGrip is Heskins' thinnest non-abrasive anti-slip material to date. It is tough yet flexible, with reliable slip resistance in wet or high-foot-traffic environments. Its very low profile allows it to flow around extreme angles and curved surfaces where thicker anti-slip tapes would lift or crease.
FlowGrip is built on a precision-calibrated PVC base layer with a total applied thickness of 0.44 mm. The adhesive has been specially modified from standard formulations so that it resists the plasticisers found in flexible plastic films, which would otherwise degrade the bond on sharp angles. The toughness of the material does not reduce its anti-slip performance or its malleability.
Besides grip enhancement, FlowGrip can be used as impact protection in fast-paced environments such as hospitals, and for marking corners or frequently used areas. Custom colours matched to Pantone or RAL references and full custom printing (images, text, safety warnings, operating instructions) are available, and printed graphics remain readable on angled surfaces.
Key features
- Thinnest non-abrasive anti-slip material offered by Heskins (0.44 mm total applied thickness)
- Flexible enough to be applied around extreme angles and curved surfaces
- Specially designed adhesive with resistance to plasticiser migration for a strong hold
- Water resistant, kind on skin, pet friendly and easy to clean
- Doubles as impact protection in fast-paced settings such as hospitals
- Rolls from 19 mm to 1260 mm wide; custom colours and custom printing available
Technical data
| Product code | H3455 |
|---|---|
| Type | Non-abrasive anti-slip tape |
| Base material | Precision-calibrated PVC base layer |
| Total applied thickness | 0.44 mm |
| Adhesive | Modified pressure-sensitive adhesive, resistant to plasticiser migration from flexible plastic films |
| Standard widths | 25 mm, 50 mm, 75 mm, 100 mm and 1260 mm master logs (19 mm and other widths on request) |
| Roll length | 18.3 m |
| Colour | Black, Pantone Black U / RAL 9005, average LRV 3.51 |
| Optimal application temperature | 10 C or above |
| Optimal service temperature | -30 C to 70 C |
| Water resistance | Water resistant |
| Customisation | Custom Pantone/RAL colours, die cutting and custom printing |
Available codes, colours and sizes
- H3455 - Black (RAL 9005), LRV 3.51
- Stock widths 25 mm, 50 mm, 75 mm, 100 mm x 18.3 m; 1260 mm x 18.3 m master logs
- Widths from 19 mm and die-cut shapes available on request
Applications
- Handles, rails and tightly curved equipment surfaces in factories, workshops and warehouses
- Grip on handheld tools, instruments and trolleys in hospitals, laboratories and clean environments
- Corner, edge and impact protection in busy corridors of hospitals, schools and public buildings
- Marking of frequently used areas and corners in logistics and production facilities
- Custom-printed grip zones with safety warnings or operating instructions on machinery
Supply in Saudi Arabia
Heskins products are supplied in Saudi Arabia by West Velocity Company, Al Khobar - quotation, delivery across the Kingdom and the manufacturer's documentation and certificates on request. Ask for a quotation by email (info@west-velocity.com) or WhatsApp.
Manufacturer information: www.heskins.com
Datasheet / brochure: PDF
